Stump Removal Las Vegas

Tree stumps are often removed due to various reasons, these include; for safety, space and landscaping. It is important to assess a stump before removing it; this will enable you to choose the appropriate techniques and methods according to the stump size. A stump’s age and size are the determining factors when it comes to removal. Old and small stumps are easier to remove compared to large and mature ones.

Removing a Stump by Hand

​Tools required are; a chainsaw, pick mattock, shovel, ax, digging bar, chain and a four wheel drive truck
Steps

• Remove any lower branches from the trunk using a chainsaw
• Cut off the top section of the trunk using an ax
• Use a pick mattock, shovel and digging bar to dig in order to expose the stump roots.
• Cut the roots with an ax
• Try pushing the stump until it is uprooted, if not, keep cutting the roots till it gets loose.
• You can also tie the chain on the truck and stump the pull it out.

Chemical Stump Remover and Killer

You will need potassium nitrate, a drill, chainsaw and an ax.
You will need; a chainsaw, potassium nitrate, a drill, shovel, scarp wood, hot water
Steps

• Use the chainsaw to cut the upper exposed part of the stump.
• Drill 1 inch holes on the upper surface and sides till they meet at a 45 degrees angle.
• Pour potassium nitrate into the holes and feel them with water.
• Wait till the stump becomes spongy, this might take six weeks.
• Use an ax to break it.

Burning a stump

You will need; a chainsaw, potassium nitrate, a drill, shovel, scarp wood, hot water and a lighter.

• Drill about 10 inch deep holes at the center of the stump
• Fill them halfway with potassium nitrate
• Pour hot water into the stump till the potassium nitrate dissolves.
• Place scarp wood on top of the stump, light them and let the stump burn.
• Use a shovel to break any remaining pieces.
• Fill the hole with soil.

Rotting the Stump.

You will need; a drill, high nitrogen substance, and water

• Drill 10 inch deep holes into the stump
• Fill the holes with the high nitrogen substance
• Pour water into the holes
• As the stump softens, chip it off.
• Fill the remaining hole with soil.

Grinding the stump away.

You can rent a grinder for about $200. You will also need a shovel, mattock, chainsaw and rake.​

• Use a shovel or mattock to clear stones around the stump.
• Use the chainsaw to cut off the stump as much as possible.
• Put on the grinder, lower it about 3 inches into the stump and move it side to side.
• Repeat the process till the stump is about 4 inches below the ground surfaces.

If you need to help removing your tree stumps, fill free to give us a call and request a free estimate. (702) 793-2711

Add Us On Social Media For All The Latest Tree Service New!

​Follow us on Twitter 
Check us out on Facebook 
Take a look at our newest picture on Instagram 
Our Google + is a great hangout.